[FSE] FS Hungary - Energy meter - CTU in Prague

[Gergely Lágler]

Dear FS Hungary electric teams,

we will use the FSUK type energy meters at the FS Hungary event. There will
be avialable connectors at the event, but for the easy installation the
following preparations are recommended:

Datalogger datasheet:
http://www.formulastudent.com/docs/fs2012-docs/data-logger-installation-instructions.pdf?sfvrsn=0

1.
Datalogger housing on the car
Requires a waterproof box with a minimum inner size: 220x80x55.
Cable glands are on one of the minimum 80x55 side of the box.
- Connector 1
   requires cable gland for 12V power supply cable
   cable diameter is 3mm, Superseal connector will be installed at the event
- Connector 2
   requires cable gland for current sensor
   cable diameter is 4mm, with a Binder 4 pole 8,5mm diameter connector
- Connector 3
   requires cable gland for voltage sensor
   cable diameter is 4mm, with a Binder 4 pole 8,5mm diameter connector
- Connector 4
   requires cable gland for BR-355-RS232 GPS sensor
   cable diameter is 3mm, with 12mm diameter connector

2.
HV connector on the car
AMP SUPERSEAL 1.5 3P mother connector
http://lomex.hu/pdf/%28tyc%29_282087.pdf
Pole 1 : HV GND
Pole 2: Not connected
Pole 3: HV+
Please pay a special attention to the polarity!

3.
Datalogger 12V power connector on the car
AMP SUPERSEAL 1.5 2P mother connector
http://lomex.hu/pdf/%28tyc%29_282087.pdf
Pole 1 : LV GND
Pole 2: LV+ (12V)
Please pay a special attention to the polarity!

4.
Space for HV sensor:
Sensor is housed in metal case measuring 60x55x30mm.

5.
Preparation for the installation of the current sensor.
Current sensor is DHAB S/15, with prepared cable, without any housing.

6.
We do not measure throttle position, and brake pressure, preparations not
required.


Thank You, and best regards,
Gergely Lagler
-- 
Gergely Lagler
XTALIN Kft
<http://www.xtalin.com/> <http://www.xtalin.com/>
------------- další část ---------------
HTML příloha byla odstraněna...
URL: <http://list.feld.cvut.cz/pipermail/fse/attachments/20120807/892326a1/attachment-0003.htm>